24" Square Stainless Steel Drop-In Fire Pit Pan (1/2" Nipple)

We add one inch to length and width or diameter so that the pan has room for expansion/contraction due to temperature change.

Linear – Single Burner. Rectangular – H-Style Burner.

The flange is 1.25” all the way around. You can add 2.5” to the length, width, or diameter to get the outside flange to outside flame dimension.

A fire pit pan is a stainless steel tray that holds the burner and supports your fire media (like fire glass or lava rock). It also helps with gas flow, drainage, and prevents heat damage to your fire feature structure. It also reduces the amount of media required to fill the enclosure by creating a false bottom.

Our pans are made from 304 stainless steel, which is rust-resistant, weatherproof, and built to withstand extreme heat. Perfect for long-term outdoor use.

Yes! All our fire pit pans include built-in weep holes or drain holes to prevent water buildup. Just make sure your enclosure also has proper drainage underneath.

Nope. Our pans are designed with small holes for drainage but are still tight enough to support lava rock & fire glass without slipping through.

Firepit: At least 3” from the inside walls of your fire feature. Fireplace: You want the H-Burner to fit in the middle of your fire box, at least 3” from edges/walls and reference any local codes for additional requirements. Most commonly the H-Burner should be narrower than the back wall of the fireplace.

For use in outdoor fire pits or fully vented natural gas fireplaces that have a chimney and flue.

When sizing a burner, you will need to allow a minimum of 3" of space from the edges of the burner to the inside of the enclosure. This helps ensure that the flames don't damage the top of the enclosure.

An H-burner is a burner shaped like the letter “H,” designed to create a wide, even flame pattern. It’s commonly used in rectangular or linear fire pits and fireplaces.

H-burners are perfect for long or rectangular fire features. They spread the flame more evenly across a straight line, giving a modern, symmetrical flame look that many people love.

Absolutely. Our H-burners are made from high-quality stainless steel, which resists rust and handles high temperatures in outdoor conditions.

We offer a variety of sizes to match different fire pit and fireplace dimensions. Choose one that leaves at least 3–4 inches of clearance on all sides inside your fire feature.

The assembled dimensions are larger than the pan so that the flame guard rests on the tabletop and sits away from the flames.

You can look up our Flame Guard size chart here to determine the best size for your fire pit. We recommend having at least a 2.5” clearance on each side of the burner area of your fire pit, and that your flame guard be placed on the outside of your fire pit for optimal performance.

Yes! We can make you a custom flame guard. To get a quote for yours, please email [email protected] or call 888-264-1017 and one of our representatives will gladly assist you.

A flame guard (also called a wind guard) is a clear glass barrier that surrounds your fire pit burner. It helps block wind, stabilize the flame, and protect surrounding surfaces and people from direct heat.

If your fire pit is in a windy or open area, yes. A flame guard keeps your flame steady, improves fuel efficiency, and protects the flame from being blown out. It is especially important for electronic ignition systems.

Not at all. Flame guards are made of tempered glass, which allows heat and light to pass through while shielding the flame from wind.

Yes. Our flame guards are made from high-strength tempered glass that’s heat-resistant, shatter-resistant, and designed for high-temperature environments.

Flame guards work with most fire pits, especially rectangular, square, or round fire tables. Just make sure you choose the right size and shape to fit around your burner area.

Measure the burner area, not the whole fire pit. Your flame guard should be about 2–3 inches larger than the burner on all sides for proper protection and ventilation.

Not at all! The clear glass gives you a full view of the flame while adding a sleek, modern look to your fire feature.

Simply wipe it down with a soft cloth and ammonia free glass cleaner. Make sure the glass is cool before cleaning to avoid streaking or cracking.

Yes. It’s designed for outdoor use and can stay on in all seasons. For extreme weather or long periods of non-use, you can store it indoors to keep it looking brand new.

Burner covers sit outside of the drop-in pans and inside of the flame guard.

A burner cover is a protective lid that goes over your fire pit burner when it’s not in use. It helps keep out rain, leaves, debris, and critters. So your fire pit stays clean and ready to use.

You can, but it’s not recommended. Exposure to the elements can lead to rust, clogged burners, and reduced performance over time. A cover helps extend the life of your investment.

Our burner covers are made to withstand high outdoor temperatures, but they should only be placed on the fire pit after the flame has been turned off and the components have cooled down.

Absolutely. We offer round, square, and rectangular covers to fit our different burner styles and pan sizes.

Yes. While fabric covers protect the whole unit, a burner cover specifically protects the burner components from moisture getting in underneath. They work great together.

Please contact [email protected] or call 888-264-1017 and one of our representatives will gladly assist you.