36" Square Stainless Steel Drop-In Pan with AWEIS System (18" Ring) - Whole House Propane 
Why Our Community Loves It
Fire Glass Calculator
Frequently Asked Questions
-
CSA Certified Burner Pan Kits
-
What does CSA stand for?
CSA is Canadian Standards Association, the certification works for the US.
-
What features are different about these pans than the Spark Ignition?
There is a safety shutoff valve, the gas will turn off if the flames are blown out. These also come with a beautiful rear flush mounted control panel.
-
Do I need to run power to this unit?
No, the CSA pans are battery operated.
-
Are CSA pans for Natural Gas or Propane?
The CSA pans come set-up for use with a 5-gal propane tank, comes with conversion kit to Natural Gas or Whole Home Propane.
-
Can I use this in a commercial application?
These pans are commonly used in commercial applications, but we recommend working with a fire certified professional familiar with your local codes and requirements.
-
What gauge are your CSA burner pans?
CSA burner pans are made of 18-gauge .304 stainless steel.
-
Electronic Ignition Kits
-
How do I control the unit?
Hard wired SIT Systems can be run with a timer/switch/smart home. Battery powered options have a 2hr timer switch.
-
What is an AWEIS and why would I need one?
AWEIS stands for All-Weather Electronic Ignition System. It allows you to light your fire pit with the push of a button, even in rain or wind. It’s perfect for both convenience and safety.
-
Can I install an AWEIS myself?
These systems should be installed by a licensed professional. They involve electrical and gas components, so it’s best to leave it to the pros.
-
Will the AWEIS system still work in the rain or wind?
Yes. Our AWEIS units are designed to operate in all weather conditions, including wind, rain, and even snow.
-
How do I turn the system on and off?
Most AWEIS setups include a switch, wall control, or can be connected to smart home systems. Some models even offer remote control or timer options.
-
What happens if the flame goes out unexpectedly?
The AWEIS includes a safety shutoff feature. If the flame is blown out, it automatically cuts the gas to prevent leaks. It will attempt to relight several times before shutting down and requiring a manual reset.
-
Spark Ignition Kits
-
How do I mount the spark ignitor to the pan?
The plate to mount the spark ignition is in a red bag attached to the packaging of the pan.
-
Do I need anything else with the Spark Ignition Kit?
The Push Button Ignitor Mounting Plate to install next to the key valve is an optional finishing piece.
-
Why are the prongs sticking so far out of the fire glass?
We recommend using 2-4” of fire glass over the burner, different applications use different depths. The leads can be trimmed to 1/8” over the glass and the tips need to be bent to within 1/8” of each other (use 2 pairs of pliers as not to break the lead off the base).
-
What is a spark ignition kit?
A spark ignition kit lets you light your fire pit with the push of a button, no matches needed. It creates a spark (like a grill lighter) that ignites the gas and starts the flame.
-
How is a spark ignition kit different from a match light kit?
With a match light kit, you light the flame by hand. Whereas with a spark ignition kit, the flame starts automatically using a push button spark ignitor.
-
Do spark ignition kits need electricity?
Nope! They run on a battery. That means no hardwiring and no need to plug anything in, just simple and easy operation.
-
How do I turn off the fire pit with a spark ignition kit?
Turn the gas valve to the "off" position. The flame will shut off, and the igniter doesn’t need to be reset, it’s ready to go for next time.
-
What happens if the spark doesn’t light the fire right away?
If the flame doesn’t start, wait a few seconds before trying again to avoid gas buildup. If you still have issues, check the battery or make sure the igniter is clean and properly connected.
-
Can I upgrade from a match light kit to a spark ignition kit?
Yes! Many fire pit owners start with a basic match light setup and later upgrade to a spark ignition system for easier, more convenient lighting.
-
Match Light Kits
-
How do I turn on the gas?
This kit includes one hose and one straight ball valve to turn on the gas, you must have access to the gas stub or additional parts.
-
What is a match light kit?
A match light kit is a simple and reliable way to light your gas fire pit. You light a match (or long lighter), manually open the gas valve, and place the flame near the burner to ignite it.
-
Why choose a match light kit over other ignition systems?
Match light kits are affordable, easy to install, and don’t require electricity. They’re perfect if you want a low-maintenance and budget-friendly option.
-
Is it safe to use a match to light a fire pit?
Yes, as long as you follow the instructions. Always stand back, keep your face away from the pit, and light the match before turning on the gas.
-
Can I use a match light kit with both propane and natural gas?
Yes, but make sure you order the correct version for your gas type. Each kit is designed to safely regulate either propane or natural gas, never both interchangeably.
-
How do I turn off a match light fire pit?
Just close the gas valve completely. The flame will go out immediately, and there are no electronics or switches to worry about.
-
Do I need a key valve with a match light kit?
No. Match light kits include a key valve, which is installed on the side of your fire pit. This valve lets you safely control the gas flow with a removable key.
-
Can I upgrade my match light kit later?
Absolutely. Many customers start with a match light setup and later upgrade to a spark ignition or electronic system as their needs change.
-
Don't See Your Question Listed?
-
Don’t see your question listed?
Please contact [email protected] or call 888-264-1017 and one of our representatives will gladly assist you.
