Spark Ignition Kits (Save 5%)

The plate to mount the spark ignition is in a red bag attached to the packaging of the pan.

The Push Button Ignitor Mounting Plate to install next to the key valve is an optional finishing piece.

We recommend using 2-4” of fire glass over the burner, different applications use different depths. The leads can be trimmed to 1/8” over the glass and the tips need to be bent to within 1/8” of each other (use 2 pairs of pliers as not to break the lead off the base).

A spark ignition kit lets you light your fire pit with the push of a button, no matches needed. It creates a spark (like a grill lighter) that ignites the gas and starts the flame.

With a match light kit, you light the flame by hand. Whereas with a spark ignition kit, the flame starts automatically using a push button spark ignitor.

Nope! They run on a battery. That means no hardwiring and no need to plug anything in, just simple and easy operation.

Turn the gas valve to the "off" position. The flame will shut off, and the igniter doesn’t need to be reset, it’s ready to go for next time.

If the flame doesn’t start, wait a few seconds before trying again to avoid gas buildup. If you still have issues, check the battery or make sure the igniter is clean and properly connected.

Yes! Many fire pit owners start with a basic match light setup and later upgrade to a spark ignition system for easier, more convenient lighting.

Please contact [email protected] or call 888-264-1017 and one of our representatives will gladly assist you.